- Other Industry Electronic Components Switching power supplies
-
-
TPE-020-02A
Switching Power Supplies
Description
| 1. SCOPE This document defines the requirements for the switch mode power supply units model TPE-012-12C. The TPE-012-12C is single output 12VDC and 12 Watts of power, The output supply voltage has over voltage, and over current protection. The over current protection is non-latching type called hiccup mode, sensing carried out on the primary side. It has an AC input operating range of between 90V - 264V. | |
| 2. APPLICABLE DOCUMENTS 2.1 SAFETY STANDARDS UL1950 CSA22.2 NO.950 EN60950 2.2 EMI STANDARDS DESIGNED TO MEET THE FOLLOWING LIMITS FCC PART 15 CLASS B SCRIP 22 CLASS B EN55022 | |
 |
3. INPUT REQUIREMENT |
|
4. OUTPUT REQUIREMENT(More Specification) |
|
5. GENERAL FEATURES |
|
6. ENVIRONMENTAL REQUIREMENTS 6.1 TEMPERTURE REQUIREMENTS  |
|
7. MECHANICAL REQUIREMENTS 7.1 MECHANICAL:120mm x 70mm x 35mm (LxWxH) * 0.4mm Mount pillar 112x62 mm |
|
7.2 CONNECTORS AC INPUT connector UL Approved IEC-320 INLET. |
|
7.2 CONNECTORS AC INPUT connector UL Approved IEC-320 INLET. DC OUTPUT connector UL Approved MOLEX 3.96 4PIN HOUSING. |
|
PIN1: V+ PIN2: GND PIN3: GND PIN4: V- |
Supplier Information
TOTAL POWER ELECTRONICS INCORPORATION
TEL : 886-2-8665-4110 FAX : 886-2-8665-45802f No.5,bao Hong Road, Hsin Tien City, New Taipei City, 231 Taiwan
Web-Site : http://www.tpe-power.com
E-Mail : celina@tpts4.seed.net.tw